The Linkit one is a board used for development purposes that has some unique features and it is a much preferred Iot platform.
Includes ARM7 EJ-S„¢, GSM, GPRS, Wi-Fi, Bluetooth BR/EDR/BLE, GPS, Audio codec, and SD card connector on a single development board
Pin-out similar to Arduino>Official Arduino Boards including Digital I/O, Analog I/O, PWM, I2C, SPI, UART and power supply, compatible with Grove 4-pin interface
Provides various interfaces for connecting to most sensors, peripherals, Groves, and other widgets
You are what you wear. Using LinkIt ONE together with MediaTek LinkIt SDK (for Arduino) you will be able to easily turn your ideas into practical prototypes and make them a reality with the Seeed productization and agile manufacturing service.
What is LinkIt ONE
The LinkIt ONE development board is an open source, high-performance board for prototyping Wearables and IoT devices. It’s based on the world’s leading SoC for Wearables, MediaTek Aster (MT2502) combined with high-performance Wi-Fi (MT5931) and GPS (MT3332) chipsets to provide you with access to all the features of MediaTek LinkIt. It also provides similar pin-out features to Arduino>Official Arduino Boards making it easy for you to connect to various sensors, peripherals, and Arduino shields.
LinkIt ONE is a co-design product by Seeed Studio and MediaTek. It brings together the parties’ knowledge in open hardware and industry-leading reference designs for Wearables and IoT devices to create this powerful development board.
LinkIt ONE is built to offer similar pin-out to the popular Arduino boards ,4-pin grove interfaces and peripheral interfaces, making it easy to add sensors, peripherals, and Arduino Shields to LinkIt ONE and create fully featured wearable and IoT device prototypes. Here you can reach some widgets to have a comprehensive understanding of this platform, and we will develop more one after another.
LinkIt ONE is packed in the protective box, along with a quick start guide, pin-out diagram relevant user mannual and accessories. The box is designed to protect the LinkIt ONE from can prevent the shocks and impact. And for retailer which you may hang on the box in your a physical store, the box may include with a pendant from which it can be hung for display.
|Box||LinkIt ONE Board||Antenna||Polymer li-ion Battery|
|Dimensions||108mm x 75mm x 33mm|
|Battery||Lithium Cells/Batteries packed with equipment UN3481 -PI966|
|Dimensions||3.3 x 2.1 inches|
|Battery Jack||3.7~4.2V Li-battery|
|DC Current Per I/O Pin||0.3~3mA|
|Digital IO Pins|
|Pin Count||16 (D0~D13, SDA, SCL)|
|Analog Input Pins|
|Pin Count||3 (A0, A1, A2)|
|PWM Output Pins|
|Pin Count||2 (D3 and D9)|
|Frequency (Resolution)||1.6KHz (13bit) / 50.8KHz (8bit) / 800KHz (4bit)/ (customizable)|
|Pin Count||2 (D2 and D3)|
|I2C (master only)|
|Set Count||1 (SDA, SCL)|
|Speed||100Kbps, 400Kbps, 3.4Mbps|
|SPI (master only)|
|Set Count||1 (MOSI, MISO, SCK, SS)|
|Set Count||1 (TX/RX)|
|UART on USB|
|Bluetooth||BR/EDR/BLE (Dual Mode)|
|Wi-Fi (MT5931)||802.11 b/g/n|
|SD Card||Up to 32GB (Class 10)|
|LinkIt One X||1|