Stepper Motor with Cable

This is a simple, but very powerful stepper motor with a 4-wire cable attached.

This is a Bipolar Motor.

Features

• Step Angle (degrees) :1.8
• 2 Phase
• Rated Voltage : 12V
• Rated Current : 0.33A
• Holding Torque : 2.3kg*cm
• 5mm Diameter Drive Shaft
• Winding resistance: 32.6 ohm
• Winding inductance: 48 mH
• Max flux linkage: 1.8 Vs
• Maximum Detent Torque: 0.016 N.M
• Total inertia (kg.m.m): 3.5 Kg.m.m
• Total friction (kg.m/s): 4 Kg.m/s
• NEMA 17 Mounting Hole Pattern (31mm)
• Motor Width: 42mm (1.67)

Documents

• Datasheet